Catskill-craftsmen 51533 Bedienungsanleitung PDF herunterladen (Seite 9)

STEP 12

A. Attach the drawer back to the drawer side with two

1 1/2” #8 screws. The drawer back leave a 1” gap at the

top to allow drop leaf support clearance. Make sure parts

are aligned as in illustration 12A.

B. Insert drawer bottom into the slots in the drawer sides,

best side to inside of drawer. Slide down until seated in

the slot in the drawer back. See illustration 12B.

C. Screw the cam posts into the two outside holes on

the inside face of the drawer front until seated. Only

3/8” of this post goes into the wood, leaving the 4 larger

guide rings/head exposed. See illustration 12C. Visit our

website www.catskillcraftsmen.com for a video on cams.

D. Insert the posts into holes in the drawer side until

seated against the front ends of the drawer sides. Insert

cams so that slot in the cam ts over the post and turn

with Phillips screwdriver until seated. Don’t over-torque!!

See Illustration 12D. See our video online at

www.catskillcraftsmen.com

E. Attach drawer handle with the two 7/8” Truss Head

screws (no illustration.)

F.Attach drawer glides to drawer sides using 5/8”

#5 screws. See illustration 12E. Drawer glides are ush

with front of the drawer sides.

ILLUSTRATION 12A

ILLUSTRATION 12B

ILLUSTRATION 12D

ILLUSTRATION 12E

ILLUSTRATION 12C

Below line in wood

Cam Posts (2)

2 used

in this step

1 1/2” Phillips Flat Head #8 Screw

2 used

in this step

7/8” Truss Head Machine Screw

2 used

in this step

Cam

4 used

in this step

5/8” Phillips Flat Head #5 Screw

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Catskill-craftsmen 51533 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Möbel Catskill-craftsmen 51533