Catskill-craftsmen 51533 Bedienungsanleitung PDF herunterladen (Seite 8)

STEP 10

Install Doors/Bottom Front Brace

A. Install doors by inserting pins in the door tops into the holes in the top front brace.

B. Place one washer on each of the door pins

in the door bottoms.

C. Take the bottom front brace, align pins

in door bottoms with holes along

top edge of brace

(are washers on pins??)

and secure brace with

1 3/4” bolts/hex nuts as before.

STEP 11

Attach Magnet to Magnet Block

A. Stick magnet to magnet plate on right door.

B. With left door open, close the right door. The magnet should be positioned over the wooden block

on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right

door. The magnet will be in the correct position on the block. Mark with a pencil.

C. Secure magnet with the two pan head screws

in the magnet packet. Center screws in the slot in

the magnet. This will allow adjustment later,

if needed.

1 3/4” Phillips Flat Head Bolt

2 Used in this step

10-24 Hex Nut

2 Used

in this step

2 Used

in this step

3/16” Flat Washer

Magnet

5/8” Pan Head Screw

2 Used

in this step

Magnet

5/8” Pan Head Screw

2 Used

in this step

Magnet

5/8” Pan Head Screw

2 Used

in this step

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Catskill-craftsmen 51533 Bedienungsanleitung Seite 8